News

Thursday 19th January 2017

Welcome new ESA member, Unichimtek

We are pleased to announce that Unichimtek have rejoined the ESA after a number of years of absence.

Read More

Thursday 19th January 2017

Spiral Wound Gasket Test Procedure

The Flange Gasket division of the ESA and FSA are in the process of establishing a new test procedure for Spiral Wound Gaskets. It is hoped that it could be adapted and created into a standard and also extended to cover Kamm Profile gaskets.

Read More

Thursday 19th January 2017

Analysing results is vital for your LinkedIn activities

As much as creating appealing updates is important it’s even more important that they are relevant to those who are reading them. In our last LinkedIn tip, we wrote about how to target your posts to the right audience, but without analysing your results, you can never be really sure what works and what doesn’t. LinkedIn offers a free analytics tool you can use, and it offers you quite a lot of insight. Today we’re going to have a look at how you can analyse updates.

Read More

Thursday 5th January 2017

Environmental Goods Act (EGA) progress

There was a "final" meeting of representatives in Geneva on 3rd and 4th December. It was confirmed that Sealing Devices were on the A list of products to be added to the EGA. This appears a positive position.

Read More

Thursday 5th January 2017

ESA Best Available Technique (BAT) needs to be rewritten to reflect IED 2010 Directive

Since IED 2010 became an active Directive, the ESA BAT document (written in 2009) needs to be rewritten to reflect the new directive.

Read More

Wednesday 4th January 2017

ESA Potable Water project update, January 2017

The ESA attended the latest meeting arranged by the European Drinking Water (EDW) formerly the ICPCDW, on 4th November. This group are very active with TG 164 committee and clearly the correct group for ESA to be involved with.

Read More

Tuesday 22nd November 2016

Message from Phil Mahoney, new FSA President

At the close of the FSA’s October meeting in Nashville, Tennessee, Mike Shorts completed his term as President for the FSA, and I began my 2 year term.  I whole heartedly agree with Mike’s last note to the ESA.  The FSA has made positive impacts in a number of areas over the past two years, and I believe that we will continue with the on-going collaboration with our Board of Directors, Executive Committee, FSA members and management staff.

Read More

Tuesday 22nd November 2016

Other updates from Standards and Legislation Director, Nov. 2016

Read about progress of ESA BAT on IPPC 1996/61/EC and IED 2010/75/EU, IED industrial emissions Article 13 forum, Food contact materials, EN 1591/4 and ASME PCC-1/2/3, Pressure Equipment Directive (PED 2014/68/EU), and ESA Code of Conduct.

Read More

Tuesday 22nd November 2016

Flange Gasket Division Update, Nov. 2016

The Flange Gasket Division held their Autumn meeting on the 12th October in Putzbrunn, Germany at the W.L. Gore facilities. The Technical Task Force for this division also held their meeting.

Read More

Tuesday 22nd November 2016

Mechanical Seals Division Update, Nov. 2016

The Mechanical Seals Division met at the end of September via Go To Meeting.

Read More

Tuesday 22nd November 2016

Elastomeric and Polymeric Seals Division news

The E&P Division met on 7th October at the Radisson Blu, Manchester airport. Several people were also able to join via video conference. A number of subjects were discussed.

Read More

Tuesday 22nd November 2016

Progress of Environmental Goods Act (EGA)

Further to the last Newsletter update, John Morton, Peter Brun and Sam Ayyash of John Crane/Smiths all attended the latest Geneva meeting of EGA representatives from 21 – 23 September on behalf of ESA. This effort is very much appreciated by ESA, as is the ongoing support of Chris Swonger in USA.

Read More

Prev 1 2 3 4 5 6 7 8 9 10 Next

Cookie Policy

Cookies are required to enable you to navigate
through this site.They are stored locally on your
computer or mobile devices. For full details of all
cookies used please see our cookie policy

By using this site you are consenting to the use of
cookies.